Merck Millipore CellASIC ONIX2 User Manual page 48

8.2 Creating and Running a New Experiment,
8.2.5
20202092 04/19
Run the Experiment,
Figure 33. Experiment will pause if an error occurs during a run
NOTE: If a warning condition occurs, e.g., gas supply low, it will be
recorded in the experiment data. If an error condition occurs, e.g., the seal
to plate is lost during execution of a protocol, the experiment will pause and
the event will be recorded in the experiment data.
Notifications of an error or warning can be sent via email or text message;
see Menu Items and Advanced Features to turn on this feature.
Correct the error, if possible (refer to Troubleshooting section) and click
Clear Errors (Figure 33) to acknowledge. Then click Resume (Figure 34)
to continue execution of the protocol.
Figure 34. Experiment may be resumed after the error has been
addressed
continued
44 of 60
continued
CellASIC ONIX2 Microfluidic System
®