Run Tab - Merck Millipore CellASIC ONIX2 User Manual

7.5 Run Tab

The Run tab is used to start and monitor the execution of a protocol.
G
Figure 16. Run tab during a protocol run
7.5.1 Run data
This area
being run.
Display Settings
Export
7.5.2 Plate View
The plate view
executed. When a protocol is not running, the plate view can be used as a control,
similar to the Manual Mode tab; when a protocol is running, the controls are
disabled.
Mini-view
20202092 04/19
C
A
F
displays run data if the experiment has been run or is currently
A
Click to show or hide columns.
B
Click to export the experiment data in tab-separated value
C
format (same as File→Export Run Data).
shows the current state of the system as the protocol is being
D
Click to open the floating manual control (also accessible
E
from Manual Mode tab).
D
B
H
I
J
24 of 60
K L
CellASIC ONIX2 Microfluidic System
®
E
N
M