Merck Millipore CellASIC ONIX2 User Manual page 34

7.7 Menu Items and Advanced Features,
7.7.2
Settings
Email alerts can be sent through the
CellASIC
recipients when a protocol is completed or
disrupted. In order to do this, an outgoing
email address and mail server must be
specified in notifications tab of the settings
dialogue. This outgoing email address/
server will be saved and act as the sender
email address in all communications
from the CellASIC
specified recipients until another email
address/server is entered. If the ONIX2
platform is shared among different
users, it is recommended that a shared
sender's email address be set up to avoid
confusion. Then enter recipient email
addresses that you'd like to receive the
email. Click the Send Test Email button
to test email functionality. The ONIX2
software will indicate whether the email
was sent successfully. If successful, a test
email using the sender's email address
will appear in the recipient's inbox with
the subject "CellASIC
After confirmation of receiving the email,
click OK to complete Email Alert setup.
20202092 04/19
Tools Menu,
continued
A — Notifications Tab
ONIX2 Software to specified
®
ONIX2 Software-
®
ONIX2 Email Test".
®
continued
NOTE: Please check your local network
connectivity and firewall settings to
allow Email Alert capability on the
CellASIC
30 of 60
ONIX2 Software.
®
CellASIC ONIX2 Microfluidic System
®