Merck Millipore CellASIC ONIX2 User Manual page 44

8.2 Creating and Running a New Experiment,
8.2.2
20202092 04/19
Run Plate Setup Sequences,
3. A protocol editor window will open. Modify the cell load sequence as
desired and click OK.
Figure 28. Edit cell loading sequence
NOTE: Plate Setup sequences are saved as part of your experiment
file. If you want to customize a setup sequence and save it for future
use, simply save your experiment file and next time you would like to
run the same sequence choose New experiment based on previous
and select the file you just saved. Your customized setup sequences will
be available and you can revert to the default sequences at anytime by
clicking Reset.
4. Click the Run cell loading sequence button to begin the loading
sequence.
continued
continued
Figure 29. Running a cell
loading sequence
40 of 60
CellASIC ONIX2 Microfluidic System
®