Figure 4.132 Diagnostics > System Log > System Log Server - Advantech EKI-7708 Series User Manual

4.10.4.3 System Log Server
The System Log Server page allows you to configure the log server.
To access this page, click Diagnostics > System Log > System Log Server.
Figure 4.132 Diagnostics > System Log > System Log Server
The following table describes the items in the previous figure.
Item
Server Address
Server Port
Severity
Facility
Apply
The ensuing table for Remote Logging Setting Status settings are informational
only: Status, Server Info, Severity, Facility and Delete (click to delete the desired
server address).
EKI-7708 Series User Manual
Description
Enter the IP address of the log server.
Enter the Udp port number of the log server.
Click the drop-down menu to select the severity level for local log
messages. The default is emerg.
The level options are:

emerg: Indicates system is unusable. It is the highest level of
severity

alert: Indicates action must be taken immediately

crit: Indicates critical conditions

error: Indicates error conditions

warning: Indicates warning conditions

notice: Indicates normal but significant conditions

info: Indicates informational messages

debug: Indicates debug-level messages
Click the drop-down menu to select facility to which the message
refers.
Click Apply to save the values and update the screen.
125