Figure 4.131 Diagnostics > System Log > Local Logging - Advantech EKI-7708 Series User Manual

The ensuing table for Logging Information settings are informational only: Logging
Service.
4.10.4.2 Local Logging
The Local Logging page allows you to designate a local target when the severity
criteria is reached.
To access this page, click Diagnostics > System Log > Local Logging.
Figure 4.131 Diagnostics > System Log > Local Logging
The following table describes the items in the previous figure.
Item
Target
Severity
Apply
The ensuing table for Local Logging Settings Status settings are informational
only: Status, Target, Severity and Delete (click to delete the desired target).
Description
Enter the local logging target.
Click the drop-down menu to select the severity level for local log
messages.
The level options are:

emerg: Indicates system is unusable. It is the highest level of
severity

alert: Indicates action must be taken immediately

crit: Indicates critical conditions

error: Indicates error conditions

warning: Indicates warning conditions

notice: Indicates normal but significant conditions

info: Indicates informational messages

debug: Indicates debug-level messages
Click Apply to save the values and update the screen.
124 EKI-7708 Series User Manual