Cfm; Figure 4.56 L2 Switching > Cfm > Cfm Settings; Figure 4.57 L2 Switching > Cfm > Me Groups - Advantech EKI-7708 Series User Manual

Item
Enabled
Apply
The ensuing table for Loopback Detection Port Information settings are
informational only: Port, Enable State and Loop Status.
4.5.14

CFM

4.5.14.1 CFM Settings
To access this page, click L2 Switching > CFM > CFM Settings.
The following table describes the items in the previous figure.
Item
State
Apply
The ensuing table for Information settings are informational only: CFM State.
4.5.14.2 ME Groups
To access this page, click L2 Switching > CFM > ME Groups.
The following table describes the items in the previous figure.
Item
Group Name
Level
Apply
The ensuing table for Information settings are informational only: Group, Level and
Delete (Click Delete to delete the desired ME group).
EKI-7708 Series User Manual
Description
Select Enabled or Disabled to setup the Loopback Detection
function.
Click Apply to save the values and update the screen.
Figure 4.56 L2 Switching > CFM > CFM Settings
Description
Click Enabled or Disabled to enable CFM settings.
Click Apply to save the values and update the screen.
Figure 4.57 L2 Switching > CFM > ME Groups
Description
Enter the name for ME group.
Click the drop down menu to select the ME group level.
Click Apply to save the values and update the screen.
73