Figure 4.128 Diagnostics > System Log > Local Logging; Figure 4.129 Diagnostics > System Log > System Log Server - Advantech EKI-7428 Series User Manual

The ensuing table for Logging Information settings are informational only: Logging
Service.
4.10.4.2 Local Logging
The Local Logging page allows you to designate a local target when the severity
criteria is reached.
To access this page, click Diagnostics > System Log > Local Logging.
Figure 4.128 Diagnostics > System Log > Local Logging
The following table describes the items in the previous figure.
Item
Target
Severity
Apply
The ensuing table for Local Logging Settings Status settings are informational
only: Status, Target, Severity and Delete (click to delete the desired target).
4.10.4.3 System Log Server
The System Log Server page allows you to configure the log server.
To access this page, click Diagnostics > System Log > System Log Server.
Figure 4.129 Diagnostics > System Log > System Log Server
Description
Enter the local logging target.
Click the drop-down menu to select the severity level for local log
messages.
The level options are:

emerg: Indicates system is unusable. It is the highest level of
severity

alert: Indicates action must be taken immediately

crit: Indicates critical conditions

error: Indicates error conditions

warning: Indicates warning conditions

notice: Indicates normal but significant conditions

info: Indicates informational messages

debug: Indicates debug-level messages
Click Apply to save the values and update the screen.
117 EKI-7428 Series User Manual