2.5
Connecting the Switch to Ethernet Ports
2.5.1
RJ45 Ethernet Cable Wiring
For RJ45 connectors, data-quality, twisted pair cabling (rated CAT5 or better) is
recommended. The connector bodies on the RJ45 Ethernet ports are metallic and
connected to the GND terminal. For best performance, use shielded cabling.
Shielded cabling may be used to provide further protection.
Straight-thru Cable Wiring
Pin 1
Pin 2
Pin 3
Pin 6
Maximum cable length: 100 meters (328 ft.) for 10/100/1000BaseT.
EKI-7708 Series User Manual
Cross-over Cable Wiring
Pin 1
Pin 1
Pin 2
Pin 2
Pin 3
Pin 3
Pin 6
Pin 6
Figure 2.12 Ethernet Plug & Connector Pin Position
Pin 3
Pin 6
Pin 1
Pin 2
8
1
19