Figure 4.23 L2 Switching > 802.1Q Vlan > Pvid Settings - Advantech EKI-7708 Series User Manual

4.5.4.2 PVID Settings
The PVID Settings page allows you to designate a PVID for a selected port, define
the accepted type and enable/disable the ingress filtering.
To access this page, click L2 Switching > 802.1Q VLAN > PVID Settings.
Figure 4.23 L2 Switching > 802.1Q VLAN > PVID Settings
The following table describes the items in the previous figure.
Item
Port Select
PVID
Accepted Type
Ingress Filtering
Apply
The ensuing table for Port VLAN Status settings are informational only: Port,
Interface VLAN Mode, PVID, Accept Frame Type and Ingress Filtering.
EKI-7708 Series User Manual
Description
Click the drop-down menu to select a port and edit its settings: FE1-
FE8, GE1-GE2, or Trunk1 - Trunk8.
Enter the VLAN ID you want assigned to untagged or priority tagged
frames received on this port. The value ranges 1 to 4094. The default
is 1.
Click the radio button to specify which frames to forward.
Tag Only discards any untagged or priority tagged frames.
Untag Only discards any tagged frames.
All accepts all untagged and tagged frames.
Whichever you select, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN standard. The default is All.
Click the radio button to specify how you want the port to handle
tagged frames. If you enable Ingress Filtering, a tagged frame will be
discarded if this port is not a member of the VLAN identified by the
VLAN ID in the tag. If you select Disabled, all tagged frames will be
accepted. The default is Disabled.
Click Apply to save the values and update the screen.
51