Figure 4.87 Qos > General > Qos Settings - Advantech EKI-7708 Series User Manual

4.8.1.2 QoS Settings
Once the QoS function is enabled, you can configure the available settings.
To access this page, click QoS > General > QoS Settings.
The following table describes the items in the previous figure.
Item
Port
CoS Value
Remark CoS
Remark DSCP
Remark IP
Precedence
Apply
The ensuing table for QoS Status settings are informational only: Port, CoS value,
Remark CoS, Remark DSCP and Remark IP Precedence.
EKI-7708 Series User Manual
Figure 4.87 QoS > General > QoS Settings
Description
Enter the port number to associate with the QoS setting.
Click the drop-down menu to designate the Class of Service (CoS)
value (0 to 7) for the Port entry.
Click Disabled or Enabled to setup the Remark CoS function. When
enabled the LAN (preassigned priority values) is marked at Layer 2
boundary to CoS values.
Click Disabled or Enabled to setup the DSCP remark option for the
QoS function.
Click Disabled or Enabled to setup the Remark IP Precedence for
the QoS function.
Click Apply to save the values and update the screen.
93