Rotax 914 Series Maintenance Manual page 25

2.5) Inspection in extreme climatic conditions ...................................... 05-50-00 / 8
2.6) Exceeding of max. admissible engine RPM .................................. 05-50-00 / 9
2.7) Exceeding of max. cylinder head temperature .............................. 05-50-00 / 10
2.7.1) Max. temperature exceeded
up to 180 °C (356 °F) - briefly .......................................... 05-50-00 / 10
2.7.2) Excess temperature of over 180 °C (356 °F)
and/or for longer than 30 min. .......................................... 05-50-00 / 10
2.8) Exceeding the max. permissible oil temperature ........................... 05-50-00 / 11
2.8.1) Excess temperature over 130 °C (266 °F)/max. 15 min. . 05-50-00 / 11
2.8.2) Excess temperature over 160 °C (320 °F) ....................... 05-50-00 / 11
2.9) Oil pressure below minimum value ............................................... 05-50-00 / 12
2.9.1) Oil pressure below minimum oil pressure on the ground . 05-50-00 / 12
2.9.2) Oil pressure below minimum permissible oil pressure
up to max. 0.5 bar (7.25 psi)/max. 1 min. in flight ............ 05-50-00 / 12
2.9.3) Oil pressure below minimum permissible value
more than 0.5 bar (7.25 psi) in flight ................................ 05-50-00 / 13
2.10) Oil specification not respected ...................................................... 05-50-00 / 14
2.11) Spark plug not in accordance with specification ............................ 05-50-00 / 15
2.12) Engine runs sluggishly ................................................................... 05-50-00 / 16
2.13) Sudden drop in boost pressure and speed ................................... 05-50-00 / 17
2.14) Sudden increase in boost pressure and speed ............................. 05-50-00 / 17
2.15) Periodic rise and fall in boost pressure and speed
(vibration of turbo control unit) ...................................................... 05-50-00 / 17
2.16) Red boost lamp of the boost pressure control lights
up continuously ............................................................................. 05-50-00 / 18
2.17) Red boost lamp of the boost pressure control is flashing ............. 05-50-00 / 19
2.18) Orange caution lamp of the boost pressure control is flashing ..... 05-50-00 / 20
2.19) Failure of the voltage supply for the turbo control unit (TCU) ....... 05-50-00 / 20
2.20) Reporting ...................................................................................... 05-50-00 / 21
Effectivity 914 Series
Edition 1 / Rev. 0
BRP-Rotax
MAINTENANCE MANUAL
05-00-00
page 3
May 01/2007