5.2)
Maintenance Concept
The maintenance functions detailed in this Manual fall into two categories: Line
Maintenance and Heavy Maintenance.
Repairs above and beyond the extent of the work described in these two
Manuals are not considered as maintenance work and may only be carried out
by authorized overhaul companies.
-
Line Maintenance (Section 00, 05 and 12):
The scope of line maintenance consists of removal, installation and adjust-
ment of engine components (including part wear). All procedures in this
Manual are to be considered line maintenance.
◆ NOTE:
-
Heavy Maintenance (separate Manual, part No. 899603)
The Heavy Maintenance Manual covers in detail work steps for the removal,
installation and repair of components where such work exceeds the limits of
standard "Line Maintenance".
◆ NOTE:
Effectivity: 914 Series
Edition 1 / Rev. 0
BRP-Rotax
MAINTENANCE MANUAL
Where applicable, you will be referred to the Heavy Mainte-
nance Manual for work above and beyond line maintenance.
This Manual must be used in conjunction with the Line Mainte-
nance Manual on which it is based.
00-00-00
page 15
May. 01/07