Rotax 914 Series Maintenance Manual page 83

After cleaning, lubricate the individual filter elements evenly with K&N filter oil
spray or K&N filter oil, part no. 897870, to achieve optimum filtering effect.
◆ NOTE:
After 5 to 10 min. the filter will be soaked with oil, noticeable by the uniform red
coloring.
■ CAUTION:
■ CAUTION:
Replacing the dry air filter
Only use dry type air filters which are specified by the aircraft manufacturer.
■ CAUTION:
Effectivity: 914 Series
Edition 1 / Rev. 0
BRP-Rotax
MAINTENANCE MANUAL
Each filter pleat must be sprayed with oil.
Never use gear oil, diesel or engine oil, as they attract humidity.
Each air filter must be secured by clamp attachmenta and a wire
securing element. See 05-00-00, sec. 2.7.3. Filter connection
must be free of oil.
Attach new air filter, free of grease, at connection faces, and
wire-secure against loss.
00183
Fig. 10
12-00-00
page 9
May. 01/07