Points of Inspection
2.2.18) Engine test run
a) Start the engine and run to operating temperature.
Ignition check at 4000 rpm engine speed.
Speed drop without ignition circuit: A _______ rpm
After engine test run, re-tighten the oil filter by hand.
See 12-00-00, sec. 2.11
2.2.19) General note
a) All Service Instructions and Service Bulletins
are complied with.
Returning engine to service
On the engine identified as per point 2.1, on the _____________ the ____hr.
Check at _____hr. (TSN__,TSO__) was carried out according to recommendations of
the engine manufacturer and was recorded in the Engine Log book.
Inspector
Effectivity 914 Series
Edition 1 / Rev. 0
BRP-Rotax
MAINTENANCE MANUAL
Page 9 of 9
B ______ rpm
(location) ,
(date)
Inspection
25*
50**
100 200 600
X
X
X X
X
X X
X
X
X
(Aircraft mechanic)
(certificate no).
05-20-00
May. 01/07
07215
Signature
page 11