Rotax 914 Series Maintenance Manual page 114

Install oil filter
See Fig. 37.
Clean the contact surface (1) of the oil pump housing (2) with a clean cloth. Apply
thin film engine oil on the gasket (3) of the oil filter (4) and then install the oil filter
on the engine. Screw on oil filter until oil filter gasket is seated solidly. Tighten
oil filter with 3/4 turn (270°).
■ CAUTION:
1 contact surface
2 oil pump housing
3
4
Effectivity 914 Series
Edition 1 / Rev. 1
MAINTENANCE MANUAL
After test run inspect tight fit of oil filter.
4
gasket
4
oil filter
BRP-Rotax
3
1
4
2
08197
Fig. 37
12-00-00
page 40
Sept. 01/07