Rotax 914 Series Maintenance Manual page 32

13 897870
14 297368
15 897186
16 297710
17 n.a.
18 n.a.
19 n.a.
20 898570
Effectivity 914 Series
Edition 1 / Rev. 1
BRP-Rotax
MAINTENANCE MANUAL
K&N Filter oil 99 - 11312,
for optimum filter efficiency and protection
against moisture ............................. 14.8 ml (0.004 gal (US))
SILASTIC 732
multi-purpose one-component silicon-based
sealing compound ............................. 310 ml (0.082 gal (US))
SILICONE HEAT CONDUCTION COMPOUND
Application of the heat conduction compound will reduce
heat transfer resistance. The grease-like, temperature-
resistant silicon compound fills cavities between
components and the cooling element (e.g.: spark plug -
cylinder head), which otherwise do not contribute to heat
conduction. .................................................... 150 g (0.33 lb)
PU glue
for shock absorption ........................ 310 ml (0.082 gal (US))
Multi-purpose grease LZ
Generally useable, neutrally colored multi-purpose grease,
water resistant and highly adherent. Useable for
temperatures from -35 °C to +120 °C (-31 °F to +248 °F) and
can be subjected to mechanical loads.
Preservation oil MobilArma 524
Water insoluble preservation oil on a hydrocarbon base with
additives. The pour point is below -18 °C (-3 °F).
Very fine emery cloth SR 4600 A - very fine standard
Is sold by the meter and used for Manual removal of
smaller rust spots or oxidation, especially for optimum
ground connections. It is highly suitable for removing
LOCTITE from surfaces or threads to make them metallic
clean. Before reapplying LOCTITE, clean surfaces with
nitrothinner or degreasing agent (CASTROL ZA 30 or OMV-
SOFT SOL). When using solvents, observe the safety
regulations for persons and environment.
Screw securing paint ...................... 20 ml (0.005 gal (US))
05-00-00
page 10
Sept. 01/07