Authorized Personnel - Rotax 914 Series Maintenance Manual

2.2)

Authorized personnel

It is a requirement that every organization or individual will possess the required
special tooling, training or experience to perform all tasks outlined. Any task
outlined herein may be performed if the organization or individual has met the
following conditions:
- Requisite knowledge of the task as a result of:
Type-specific authorization training for the applicable ROTAX engine which
is approved by the national aviation authority.
"OR"
- Experience in performing the task and
- Formal instruction from a BRP-Rotax authorized training facility or
"On-the-job" instruction by a BRP-Rotax or authorized BRP-Rotax Dis-
tributor representative.
Including:
- Suitable work environment to prevent contamination or damage to engine
parts or modules.
- Suitable tools and fixtures as outlined in the ROTAX Maintenance Manual.
- Reasonable and prudent maintenance practices are utilized.
- And the Requirements of the applicable regulatory authority regarding
maintenance procedures are met.
Maintenance organizations and individuals are encouraged to contact
BRP-Rotax through its worldwide distribution network for information and
guidance on any of the tasks outlined herein. Maintenance directories are
available from the ROTAX authorized distributor organization. See 00-00-00
sec. 5.3.
Effectivity 914 Series
Edition 1 / Rev. 0
BRP-Rotax
MAINTENANCE MANUAL
05-00-00
page 6
May 01/2007