3) Checking The Engine Suspension - Rotax 914 Series Maintenance Manual

f) Inspect the overflow bottle for damage and
abnormalities, including
Verify coolant level, replenish as necessary.
Inspect line from expansion tank to overflow bottle for
damage, leakage and clear passage.
Inspect venting bore in cap of overflow bottle for clear
passage.
See 12-00-00, sec. 3.5
g) Inspect all oil lines for damage, leakage,
hardening from heat, porosity, security of connections
and attachments.
Verify routing for kinks and restrictions including
restricted elbows.
See 12-00-00, sec. 2.3
h) Inspect all fuel lines for damage, leakage, hardening
from heat, porosity, secure connections and attachments.
Verify routing for kinks and restrictions including
restricted elbows.
In the case of steel fuel lines, also check for any
cracks and/or scuffing marks.
See 12-00-00, sec. 2.3
i) Inspect the wiring and its connections for secure fit,
damage and signs of wear.
See 12-00-00, sec. 6.1

2.2.3) Checking the engine suspension

a) Inspect engine suspension and fasteners for secure fit,
including damage from heat, deformation, cracks.
See 12-00-00, sec. 2.4
Effectivity 914 Series
Edition 1 / Rev. 0
MAINTENANCE MANUAL
Points of Inspection
BRP-Rotax
Page 4 of 9
25*
X
X
X
X
X
Inspection
Signature
50** 100 200 600
X X X X
X X X X
X X X X
X X X X
X X X X
05-20-00
page 6
May. 01/07
07215