Exceeding Of Max. Admissible Engine Rpm - Rotax 914 Series Maintenance Manual

2.6)

Exceeding of max. admissible engine RPM

◆ NOTE:
- If the limit was exceeded for max. 1 minute up to 6200 rpm:
- Check that the push-rods are straight.
- If the limit was exceeded for more than 1 minute:
The whole engine must be inspected, repaired or overhauled in accordance
with the ROTAX instructions for continued airworthiness.
- Check that the push-rods are straight.
- Inspect all systems for correct functioning.
- Detailed inspection of affected engine components.
- If the speed of 6200 rpm was exceeded:
The whole engine must be inspected, repaired or overhauled in accordance
with the ROTAX instructions for continued airworthiness.
- Check that the push-rods are straight.
- Inspect all systems for correct functioning.
- Detailed inspection of affected engine components.
Effectivity 914 Series
Edition 1 / Rev. 0
BRP-Rotax
MAINTENANCE MANUAL
Any exceeding of the max. admissible engine RPM must be
entered by the pilot into the engine log book stating duration
extent of overspeeding and pertinent detail.
05-50-00
page 9
May. 01/07