Table of Contents
Advertisement
Drive drawer open alarm
Slow beep (every 5 seconds)—The drive drawer is open, and drives are not fully protected by system air
flow.
Fast beep (every 0.5 seconds)—Close the drive drawer immediately to avoid drive damage or data loss
and storage blade shutdown.
The Health status LED bar turns green when drives return to normal operating temperature.
Drive LED definitions
Item
LED
Locate
1
Activity ring
2
Do not remove
3
Drive status
4
Status
Definition
Solid blue
The drive is being identified by a host application.
Flashing blue
The drive carrier firmware is being updated or requires an
update.
Rotating green
Drive activity
Off
No drive activity
Solid white
Do not remove the drive. Removing the drive causes one or more
of the logical drives to fail.
Off
Removing the drive does not cause a logical drive to fail.
Solid green
The drive is a member of one or more logical drives.
Flashing green
The drive is rebuilding or performing a RAID migration, stripe
size migration, capacity expansion, or logical drive extension, or
is erasing.
Flashing
The drive is a member of one or more logical drives and predicts
amber/green
the drive will fail.
Flashing amber
The drive is not configured and predicts the drive will fail.
Solid amber
The drive has failed.
Off
The drive is not configured by a RAID controller.
Component identification 46
Advertisement
Table of Contents
