Order Number Confirmation - YASKAWA MOTOMAN-MH80 Instructions Manual

MH80 Manipulator
1.2
1 Product Confirmation

1.2 Order Number Confirmation

Order Number Confirmation
Check that the order number of the manipulator corresponds to the
DX100. The order number is indicated on a label as shown below.
Fig. 1-1: Location of Order Number Label
THE MANIPULATOR AND THE CONTROLLER
SHOULD HAVE SAME ORDER NUMBER.
ORDER NO.
DX100
G
TYPE ERDR-
POWER SUPPLY
3PHASE AC200V 50/60Hz kVA
PEAK
AC220V 60Hz AVERAGE kVA
INTERRUPT CURRENT kA
SERIAL No.
DATE
MADE IN JAPAN NJ2960-1
ORDER NO.
NJ1529
PROGRAMMING PENDANT
X 8 1
(a) DX 100 (Front View)
1-2
Label (Enlarged View)
Check that the manipulator
and the DX100 have the
same order number.
(b) Manipulator (Side View)
HW1480080
158813-1CD
12 of 77