Phone Security Settings - Nortel MCC3100 User Manual

Manual setup
3. Configure the settings listed in
Table 15: Dialing Plan configuration fields
PBX Prefix
Optional Prefix
4. Tap Apply to accept your changes or Undo to start again.

Phone security settings

Phone security settings are available for GSM devices only. Use the
following procedure to program the phone security settings.
1. From any screen, select Tools > Settings.
The MCC 3100 for Windows Mobile screen appears.
2. Tap the Phone Security tab and configure the following:
— Lock or unlock your device:
108
Table 15 on page
If you place a call on the WiFi network, select
the PBX Prefix in order to route the call to a
PBX. For example, if you dial 3257023 and
then select a PBX Prefix 9, the ultimate number
is 9 325 7023. The PBX removes the 9 and
before the call forwards to a destination outside
the WiFi network (PSTN).
If you place a call on either the cellular or WiFi
network, select an Optional Prefix to insert in
the number you dial. Typical Optional Prefixes
include areas codes (for example, 416) and
country codes (for example, 33).
For WiFi calls, you can use the Optional Prefix
in conjunction with the PBX Prefix. For
example, if you dial 325 7023 and select a PBX
Prefix 9 and an Optional Prefix 905, the
ultimate number is 9 905 3257023.
If you require multiple Optional Prefixes,
separate each entry with a comma (for
example, 416, 905, 613).
108.