Network Configuration Changes; Nortel Mobile Communication 3100 Series Portfolio; Nn42030-600 01.04 Standard - Nortel MCG3100 Administration Manual

76 Maintenance
3
4
5
6
Network configuration changes
If you must change the network configuration parameters of the MCG 3100,
you can use the networkconfig script to change network parameters
configured during the initial installation (for example, IP address or default
gateway). This script is part of the Linux Base installation. You must reboot
the MCG 3100 after you run the script. For more information about the
networkconfig script, see Linux Platform Base and Applications Installation
and Commissioning (NN43001-315).
The license check uses the hostname as part of the machine identification. If you
change the hostname of the MCG 3100, you must reactivate the license. After
you reboot the MCG 3100, reload the license file to trigger the reactivation.
Copyright © 2007, Nortel Networks
.
In the left pane of the Preferences dialog box, select TCP and clear
the Validate the TCP checksum if possible check box.
In the left pane of the Preferences dialog box, select UDP and clear
the Validate the UDP checksum if possible check box.
Click Apply.
Click OK.

Nortel Mobile Communication 3100 Series Portfolio

Nortel Mobile Communication Gateway 3100 — Administration

NN42030-600 01.04 Standard

Release 2.0 14 November 2007
—End—
ATTENTION