Warning For Installation; Warning For Use Environment; Caution; Cautions To Be Taken For Handling This Product - Renesas M306K9T2-CPE User Manual

Compact emulator with real-time trace functions for m306k9

Table of Contents

Warning for Handling This Product:

• Do not disassemble or modify this product. Disassembling or modifying this product can cause

damage.

Warning for Installation:

• Do not set this product in water or areas of high humidity. Spilling water or some other liquid into

the main unit can cause an unrepairable damage.

• This equipment is to be used in an environment with a maximum ambient temperature of 35°C. Care

should be taken that this temperature is not exceeded.

Cautions to Be Taken for Turning On the Power:

• Turn on the power of the emulator and target system as simultaneously as possible.

• Turn off the power of the emulator and target system as simultaneously as possible.

• Do not leave either the emulator or target system powered on, because of leakage current the

internal circuits may be damaged.

• When turning on the power again after shutting off the power, wait about 10 seconds.

• Use caution when handling the main unit. Be careful not to apply a mechanical shock.

• Do not touch the connector pins of the emulator main unit and the target MCU connector pins

directly. Static electricity may damage the internal circuits.

• Do not pull the compact emulator main unit by the USB interface cable for connecting to the target

system. The cable may cause a break.

• Do not use inch-size screws for this equipment. The screws used in this equipment are all ISO

(meter-size) type screws. When replacing screws, use same type screws as equipped before.

• If the emulator malfunctions because of interference like external noise, do the following to remedy

the trouble.

(1) Press the RESET button on the emulator upper board.

(2) If normal operation is not restored after step (1), shut OFF the emulator once and then

WARNING

reactivate it.

( 9 / 56 )

Table of Contents