Karl Storz AIDA WD 300 System Description page 70

Copying data sets
NOTE: The Copy function is available for completed procedures.
1
1. Tap on Copy.
$ A window opens in which you can select the target medium.
2. Select the target medium and tap OK.
$ Data transfer begins.
$ During the copying process, the message Preparing procedure data to copy to USB appears.
$ The copying process is carried out. If the process is not carried out, it will be temporarily stored in
Open tasks.
3. Open tasks can be redirected, deleted or re-activated as required.
See also '4. 3. 6 Finishing' on page 4-28.
$ When shutting down, a window indicating that copying is not completed opens.
4-34
Operation
96296083EN / BA