4. Enter the following service key in the top line:
Service-MLAACDET-ACAA-HHTPZATZ
5. Enter the reason for modification in the bottom line and then click on Next.
$ The following window opens:
$ The system is now in Service Mode and the printer driver can be installed.
NOTE: Please do not close the window above as additional input is required at a later point.
1
NOTE: You can now install a printer driver.
1
It is important to specify the following under IPv4 for setting up a printer in the network:
- IP address
- Network mask
- Gateway address
KARL STORZ AIDA
®
Installation
3-3