Karl Storz AIDA WD 300 System Description page 128

3. To select the watermark logo for the report, tap on the button next to the Logo input field.
Navigate to the storage location of the logo, highlight the file and tap on Open.
'Autoprint' menu
Automatic printing during the Auto print procedure
Set up automatic printing for regular printing during the ongoing procedure once the specified
number of images for printing has been reached in the Auto print menu.
1. Place or remove the check mark next to Enable auto print in order to activate or deactivate
automatic printing.
2. Under Name, enter a designation for this printing procedure.
3. Under Number of copies, set the number of copies which are to be printed automatically.
4. Under Number of images per page, specify the number of images which are to be placed on
each page. Printing starts automatically once this number has been reached.
NOTE: The remaining images are automatically printed at the end of the procedure.
1
2-36
Description of the program functions
96296082EN / BA