Description of the program functions
Printing automatically at the end of the procedure
Set up automatic printing on conclusion of the procedure in the Automatic menu.
1. Under [Select...], select 'Printer' and tap on Add.
$ Your selection is included in the list of targets.
.
NOTE: If you wish to delete a target from the list, highlight it and tap on Remove
1
2. Specify which data you wish to print automatically.
For this, if necessary, place or remove the checkmarks next to Stills, Checklist and Removable
3. Configure the printer.
4. Under Name, enter a designation for this printing procedure.
2-33
KARL STORZ AIDA
®