Karl Storz AIDA WD 300 System Description page 110

2. 7. 2 'Capture' module
' ' menu
General
In the General tab, you can receive signals from different types of source via 2 channels:
• Display Port sources at Input 1
• HDMI sources at input 2
Each signal from these sources can be assigned a profile, which is generated from the following
settings:
• Image format
• Video format
• Video quality
• Video resolution
• Video chapter
• Maximum size for each video
Place a check mark next to the relevant check box to activate the appropriate source.
If the source supports 3D format, place a check mark next to '3D'.
NOTE: Because the 3D format has a defined quality profile, the current profile settings are deactivated
1
(apart from the video section).
Placing a check mark next to 'sRGB' will enable you to use this color space.
NOTE: To minimize the transmission rates and storage requirements, it is recommended that different
1
capture qualities be set for the channels.
This does not apply to 3D sources!
2-18
Description of the program functions
96296082EN / BA