Karl Storz AIDA WD 300 System Description page 176

1. 4 Notes for operators
• This device is produced in accordance with state-of-the-art technology and is safe to
operate. Nonetheless, the device may still be a source of risk, especially if it is operated by
personnel who are not adequately trained or if it is used incorrectly and for a purpose other
than its intended use.
• The device must be operated, cleaned, and disinfected by specialist personnel only.
Warning: All of the assembly work, disassembly work and setting adjustments described in
3
this instruction manual must only be carried out by trained specialist personnel who have been
delegated to do so by the operator.
• For safety reasons, actions or interventions which extend beyond those described in
this manual must only be carried out by KARL STORZ or a company authorized by
KARL STORZ. Before a company can receive this authorization, the service personnel of the
company in question must successfully participate in a technical training course conducted
by KARL STORZ. Authorization is then granted for a fixed period of time.
1. 4. 1 Initial commissioning
• This instruction manual is valid following an initial commissioning procedure which has been
properly carried out.
• The device must be thoroughly cleaned and disinfected before initial use.
1. 4. 2 Availability of the instruction manual
• The instruction manual is a component of the device and must therefore be kept at a location
in the immediate vicinity of the device to enable reference to safety instructions and important
information regarding its use at any time.
• Do not pass the device on to a third party without a valid instruction manual. With the aid of
the identity number and version number, ensure that an up-to-date, valid instruction manual is
passed on with the device.
1. 4. 3 Warranty
KARL STORZ guarantees the safe and proper functioning of the device only subject to the
following conditions:
• The device is used only as designated and operated in accordance with the information
provided in this manual.
• Only original replacement parts or accessories which are defined and approved by
KARL STORZ SE & Co. KG are used. The use of other parts poses unknown risks and must
be avoided at all times.
• No structural modifications are made to the device. Unauthorized modifications or alterations
to the device or the software are not permitted for safety reasons and void the guarantee.
• Inspection and maintenance work is carried out in accordance with the prescribed time intervals.
• Initial commissioning has been performed.
1-2
Important information for safe use
96296081EN / BA