Karl Storz AIDA WD 300 System Description page 120

2. 7. 4 'Finish' module
'Automatic' and 'Manual' menu
Specify the targets for automatic data saving in the Automatic menu. In the Manual menu, specify the
targets for manual, optionally selectable data saving.
1. Under [Select ...], select a target which you wish to include in data saving.
2. Tap on Add.
$ Your selection is included in the list of targets.
NOTE: If you wish to delete a target from the list, highlight it and tap on Remove.
1
3. Repeat the first two steps for all targets which are to be included in data saving.
4. For each target, specify which data you wish to have saved.
For this, if necessary, place or remove the checkmarks next to Stills, Videos and Checklist.
NOTE: In principle all data is saved when saving manually.
1
5. Specify for each target whether the saved data is to be called up again for display and
processing.
For this, if necessary, place or remove the check mark next to Reference.
6. Specify whether the data in the module Open tasks is to be protected before deletion.
For this, if necessary, place or remove the check mark next to Removable.
7. Configure the target.
2-28
Description of the program functions
96296082EN / BA