Karl Storz AIDA WD 300 System Description page 48

Operation
2. Tap on the Import DICOM Worklist button at the bottom left.
$ The submenu opens for searching in the DICOM worklist.
3. Select a parameter for searching and enter your search term.
4. Tap on the magnifying glass symbol.
$ The list of results is displayed.
5. Select the data set you require and tap on Select patient.
$ The selected data set is loaded and displayed in the Patient module.
Loading outline data from the HIS (hospital information system)
If the patient is already stored in the HIS, you can load the data without having to enter it again.
NOTE: For this function, the HL7 query must be enabled in the General/HL7 menu in configuration
1
mode.
4-12
96296083EN / BA