Karl Storz AIDA WD 300 System Description page 154

$ The following window opens.
4. Select the USB drive as the boot device.
Note: The name is that of the physical USB drive. In the above window, this is SanDisk. This is
1
normally the third entry in the list.
5. Select the USB drive as the boot device and confirm the selection by pressing the Enter button.
$ The following screen appears after a brief period.
Note: You can select a special keyboard layout. No keyboard entry is usually required for the following
1
procedure. For this reason, you can press US.
3-2
Data backup and reorganization
96296082EN / BA