Karl Storz AIDA WD 300 System Description page 56

Recording a video sequence
NOTE: Video sequences can only be recorded and saved if this function was set up accordingly during
1
the configuration.
NOTE: Audio sequences can only be recorded from one source. The simultaneous capture of two
1
sources is not possible.
NOTE: With video recordings, the audio is also recorded as standard.
1
It is, however, possible to suppress the audio recording; see next chapter.
NOTE: The last recording is shown at the top of the list alongside the preview window. Pay attention to
1
the time specified for the recording.
1. Start a video by clicking button a or b.
$ The start of the recording is confirmed to the right of the preview window in area c.
2. To start another recording with another camera when video recording is in progress, tap on button
a or b.
3. To stop a video recording, tap on button a or b.
NOTE: When an external loudspeaker is connected, an acoustic signal will sound to indicate when a
1
recording is started and stopped, and when images are captured.
4-20
a
b
b
Operation
c
96296083EN / BA