Karl Storz AIDA WD 300 System Description page 201

Table 201
Guidelines and manufacturer's declaration – electromagnetic emissions
The KARL STORZ AIDA
The user of the device should make sure that the
KARL STORZ AIDA ®
Interference emission
measurements
RF emissions
acc. to CISPR 11
RF emissions
acc. to CISPR 11
Emission of harmonic
oscillations acc. to
IEC 61000-3-2
Voltage fluctuations/
flicker emissions acc. to
IEC 61000-3-3
WD 300
KARL STORZ AIDA ®
® WD 300 is intended for use in the electromagnetic environment specified below.
WD 300 is operated in such an environment.
Conformity level
Complies with
Group 1
Complies with
Class A
Complies with
Class A
Complies
Electromagnetic environment – guidelines
The device uses RF energy only for its internal
function. Therefore, its RF emissions are very low
and are not likely to cause interference in nearby
electronic equipment.
The device is suitable for use in all establishments
other than domestic and those directly connected
to the public low voltage power supply network that
supplies buildings used for domestic purposes.
Appendix
7-3