Error Identifier; Error Identifier Hardware; Error Identifier Parameter Selection - Primes FocusParameterMonitor FPM 60 Original Instructions Manual

PROFIBUS®-/PROFINET® parameter set
8.3

Error identifier

The error identifiers are divided into the six groups as described below: Hardware, Parameter selection, etc.
When outputting the error identifiers, it should be noted that the error identifiers within a group are added up.
In the parameter selection group, for example, the error identifier „3" could be output. From this, it can be
combined that the window is too small in X and in Y direction.
8.3.1

Error identifier hardware

Group message "Error Parameter Selection" is set.
„Measurement Failure" is set.
Fehler
Xilinx or ExtXi error
EE-CRC incorrect
8.3.2

Error identifier parameter selection

Group message "Error Parameter Selection" is set.
„Measurement Failure" is set.
Error
Window (in X) too small
Window (in Y) too small
Window (in X) too big/too far to
the right
Window (in Y) too big/too far up
Resolution (in X) too small
Resolution (in Y) too small
Resolution (in X) too big (for LDS)
Resolution (in Y) too big (for LDS)
Resolution (in X) too big
Resolution (in Y) too big
smallest y-window at x_
anz==1024
Too many pixel for array
sample_data
Attenuation too strong
Integration time or delay too big
Inadmissible BeamFind-param-
eters
Other inadmissible parameter
Revision 06 EN 02/2023
Error condition
mess_x == 0 oder
(anz_x>512)&&((mess_y/anz_y)*projection) < (pixelpitch_y*2)
mess_y == 0
((pos_x+mess_x)*projection) > ((pixelnumberx*pixelpitchx)/1000)
((pos_y+mess_y)*projection) > ((pixelnumbery*pixelpitchy)/1000)
anz_x == 0
anz_y == 0
anz_x > 1024
anz_y > 1024
((mess_x/anz_x)*projection) < (pixelpitchx)
((mess_y/anz_y)*projection) < (pixelpitchy)
((mess_y/anz_y)*projection) < (pixelpitchy * 2)
((anz_x+25)*anz_y) > 550000
amp < -85.1;
tInt > 217026µs; tDelay > 217026µs
counts > 4095 or percent > 99
Evaluation algorithm > 1; Trigger mode > 2; Measuring mode>3;
Kennung
0x0001
0x0002
Identification
0x0001
0x0002
0x0004
0x0008
0x0010
0x0020
0x0040
0x0080
0x0100
0x0200
0x0400
0x0800
0x1000
0x2000
0x4000
0x8000
35