Enter Measurement Parameters With The Lds; Establish Connection; Sensor Parameters - Primes FocusParameterMonitor FPM 60 Original Instructions Manual

11.2

Enter measurement parameters with the LDS

11.2.1

Establish connection

To create a setup with the PRIMES LDS an Ethernet connection of the FPM to the computer (or network)
must be available and the software must be installed on a windows based PC.
See chapter 9.3 on page39
11.2.2

Sensor parameters

Set a resolution of 512x512 pixels in the Sensor Parameter dialog box.
48
FocusParameterMonitor FPM
FPM
Revision 06 EN 02/2023