Measuring; Measuring Procedure; Measuring Procedure Power Measurement - Primes FocusParameterMonitor FPM 60 Original Instructions Manual

Measuring

12 Measuring
12.1

Measuring procedure

The measuring sequences are exemplary and only describe the sequence.
Checking and ensuring compliance with the maximum energy input and the maximum absorber temperature
must be supplemented and ensured by the user!
12.1.1

Measuring procedure power measurement

System
Sets command.start (259.0)
Deletes command.start (259.0)
Turn on the laser
Turns off the laser (after the necessary
irradiation time)
Reads out the results
Revision 06 EN 02/2023
FPM
If Shutter is open:
Deletes status.idle (284.1)
Sets status.acknowledge (284.6)
Deletes status.acknowledge
Ensures readiness for operation
Deletes status.measurement_finished (284.2)
Sets status.ready (284.0)
The irradiation carried out is identified (by means of the temperature rise of
the absorber)
Deletes status.ready (284.0)
Sets status.measurement_running (284.1)
Waits for thermalization (11 s)
Optionally: detects the irradiation time
Carries out power measurement
Enters results into the profibus register
Deletes status.measurement_running (284.1)
Sets status.idle (284.4)
Sets status.measurement_finished (284.2)
(284.6)
61