Table of Contents
Advertisement
PROFIBUS®-/PROFINET® parameter set
8.3.5
Warning identifier single plane measurement
Group message "Warning Single-Plane Measurement" is set.
"Irradiation failure" is set.
Warning
Beam on the left edge
Beam on the right edge
Beam on the lower edge
Beam on the top edge
Oversaturated
Undersaturated
8.3.6
Warning identifier caustic
Group message "Warning Caustic" is set.
"Irradiation failure" is set.
Warning
No power presetting
Revision 06 EN 02/2023
Warning Condition
Calculated subwindow or pos_x - r on the left edge
Calculated subwindow or pos_x + r on the right edge
Calculated subwindow or pos_y - r on the lower edge
Calculated subwindow or pos_y + r on the upper edge
Raw data at impact (4095 counts) > 5 %
Reference surface: Calculated beam surface (if beam radius could
be calculated; otherwise: Subwindow, if BeamFind successful;
otherwise: window surface)
Raw data < 2500 counts
Warning Condition
No power value or power value == 0 transmitted
Identification
0x0001
0x0002
0x0004
0x0008
0x0010
0x0020
Identification
0x0001
0x0002
0x0004
0x0008
0x0010
0x0020
37
Advertisement
Table of Contents
