Table of Contents
Advertisement
Connections
Power supply (Power)
Power is supplied via 7/8'' connectors. The two connectors are internally connected 1:1.
Pin assignment (top view mating side)
Plug
Socket
Tab. 7.2:
Connectors power supply
Ethernet
The Ethernet port is either hidden under the maintenance cover (Busaddress) or in a maintenance hatch with
a freely accessible Ethernet port. The Ethernet port is an RJ45 connector.
7.1.2
Set PROFIBUS® address
1. Remove the four screws from the maintenance cover.
2. Use rotary switches A and B to set the desired bus address. The arrowhead of the rotary switch must
point to the corresponding number.
3. Note that the address has two digits. Use switch A to set the first digit (tens), use switch B to set the
second digit (ones).
The PROFIBUS address can be set from 1 to 99. The address 17 is set at the factory.
4. Put the cover back in place and screw it on.
Fig. 7.2:
Rotary switch under the maintenance cover
Revision 06 EN 02/2023
Pin
1
2
3
4
5
In
Out
FocusParameterMonitor
Zeichnungsname:
FPM Anschlußfeld PB Druck
Zeichnungsnummer:
FPM03A00040040D
Bearbeiter:
M.Werner
Datum:
14.04.2014
Druck geändert :
03.07.2014
Druckausführung:
einfarbig weiss
Function
GND actuator
GND sensor
FE (functional earth)
Sensor supply 24 V
Actuator supply 24 V
185
COM
Run
Stop
Power
FPM
B
A
Bus-address
Änderungen:
Fertigungszeichnung und Zeichnungsnummer wurden
geändert.
21
Advertisement
Table of Contents
