Removal From The Laser System - Primes FocusParameterMonitor FPM 60 Original Instructions Manual

Mounting
6.3

Removal from the laser system

CAUTION
Damage to hearing
If the compressed air hose is loosened while still under pressure, this generates noise. This can
cause hearing damage.
 Only loosen the compressed air hose when there is no longer any pressure.
1. Switch off the laser beam.
2. Ensure that moving parts, e.g. robot arms, etc. are at a standstill and that they cannot be set in motion
unintentionally.
3. Close the shutter.
4. Disconnect the device from the power supply.
5. Switch off the compressed air supply.
6. Disconnect all connections.
7. Unscrew the mounting screws.
8. Remove the device from the laser system.
Revision 06 EN 02/2023 19