Primes FocusParameterMonitor FPM 60 Original Instructions Manual page 26

Power supply (XD1/XD2
The connectors for the PROFINET
They are internally through-connected 1:1.
The plug is used for feeding, the socket for looping through the supply voltage
Pin assignment (top view mating side)
Plug Socket
Tab. 7.5: Connectors power supply
Ethernet (XP3)
The connector for the PROFINET
Pin assignment (top view mating side)
Sockets designation: Phoenix-Contact 1404548 VS-BH-M12FSX-10G-RJ45-90
Suitable cable: Phoenix Contact 105477; Patchkabel CAT6A M12 auf RJ45; VS-M12MSS-IP20-94F/ 5,0/10G (1440627).
Tab. 7.6: Ethernet port
26
)
M12 power supply are 5-pin, L-coded M12 connectors.
®
Pin
1
2
3
4
5
M12 Ethernet port is an 8-pin, X-coded M12 SPEEDCON connector.
®
Pin
1
2
3
4
5
6
7
8
FocusParameterMonitor FPM
Function
Sensor power supply 24 V
GND actuator
GND sensor
Actuator power supply 24 V
FE (functional earth)
Function
TX+
TX-
RX+
RX-
Not connected
Not connected
Not connected
Not connected
Revision 06 EN 02/2023