Figure 47. Drive Carrier; Figure 48. Drive Carrier Removal; Figure 49. Drive Carrier Installation - Intel M70KLP Series Technical Product Specification

Intel® Server System M70KLP Family Technical Product Specification
All 2.5" drives are mounted to a drive carrier using four (4) screws. Drive removal from the chassis and
installation into the chassis is tool-less. However, installing a drive into the drive carrier requires a Phillips*
head screwdriver.

Figure 47. Drive Carrier

Note: All drive bays must be populated and all drive carriers installed within the front drive bay must be
assembled with a drive or supplied drive blank while a system is operational.
Pressing the release button on the lower face of the drive carrier releases a handle that is used to pull the
drive from the drive bay.

Figure 48. Drive Carrier Removal

The handle must be in the open position when installing the drive into the drive bay. When the drive is fully
inserted into the drive bay, the handle is then pushed closed. This procedure guides the drive to its fully
installed position and securely latches it to the drive bay.

Figure 49. Drive Carrier Installation

53