Table of Contents
Advertisement
September 2007
Adding a voice card
To add a voice card you install a new card and let the PC detect it, as
described in the following steps:
1 Insert a compatible voice card into an empty slot on the bus of the
recorder PC.
2 Log in to the Recorder Manager and click General Setup > Voice
Cards.
3 Follow procedures in Adding a New Voice Card in the Nortel TDM
Recorder System Administration Guide.
4 Refer to Appendix B, Voice Card Configurations, in the Nortel TDM
Recorder System Administration Guide for the specific voice card you
are creating and to view details about completing its properties.
System Infrastructure Guide
Configuring Level 1 Components
99
Advertisement
Table of Contents
