Table of Contents
Advertisement
Call Recording and Playback
update.xml
mismatches, such as type of card, serial number, number of channels, and
PCI slot occupied. The Capture engine then recalculates logical to physical
channel mappings and writes to a log file, sounding an alarm if a card fails
to initialize. The card finally has to be acknowledged (by clicking Accept)
and configured.
Validating licensing
The Recorder's Capture component loads and decodes the license key
during startup and then enforces channel licensing when requests to record
calls are received. During startup, the license key is read from the system's
configuration file,
authenticity verified. Upon verification, channel configurations are loaded
from the
config.xml
configured compared to the actual number of channels licensed. Next, a
request (CTI driven) or event (Tap Sense) is issued to the Capture engine to
start recording a call. After checking that the requested channel to be
recorded is licensed, the Capture engine starts recording the channel,
generating an audit log at the same time.
If one or more of the following License Key conditions exists, the capture
engine is not initialized:
Missing
Tampered
Invalid or Expired
Configuration Mismatch
Channel not Licensed
44
is generated. This file contains details of detected
config.xml
file and validation of the number of channels
. The license key is then decoded and its
Standard 3.0
Nortel TDM Recorder
Advertisement
Table of Contents
