Configuring Recorder Components - Nortel TDM Recorder User Manual

September 2007

Configuring Recorder components

Configure Recorder components to optimize software settings for the
recorder's hardware components. Recorder components are configured in
the Recorder Manager and include the following:
Voice Cards, as described in "Configuring voice cards" on page 97
Local Archives
Disk Manager
Consolidator
Alarms, as described in "Configuring alarms" on page 100
The following table describes the purpose of each component and names the
section of the Nortel TDM Recorder System Administration Guide that
describes where you will find detailed configuration procedures. In
Recorder Manager you can also click any tab and then click Help for
detailed information about each component.
Component
Voice Cards
Archive
System Infrastructure Guide
Description
Telephony cards that work with
the Capture Engine to capture
voice data to propagate a
file for the audio portion of the
call and propagate a
from event data
Software component that
continuously polls the Workflow
Manager to check if calls are to
be archived to disk, tape or DVD.
Configuring Level 1 Components
System
Administration Guide
Section
Setting up Voice Cards.
See also "Configuring
voice cards" on page 97
.wav
of this guide.
file
.xml
Configuring Local
Archive
91