Table of Contents
Advertisement
September 2007
Configuring licenses
The following section appears in the Nortel TDM Recorder Installation
Guide and in the Nortel TDM Recorder System Administration Guide. It is
shown here to reinforce the importance of licensing.
Configure the Recorder license to add or update information pertaining to
your Recorder's license, such as adding more channels. You do this by using
a new Activation key, if this is a first time license activation, or by using an
existing Activation key if you are upgrading. This information is described
in the following topics:
Activating the Recorder license for the first time
Re-activating a Recorder license
Activating the Recorder license for the first time
When you login in to Nortel TDM Recorder when installing the system, you
are required to confirm your license or apply for a temporary one. The first
time you log in to the newly-installed application, you use the provided user
ID and password. You then must change the password and use the new
password every time you access the application.
To activate the Recorder license for the first time:
1 Launch the Recorder Manager and choose a language.
2 Enter the supplied username and password.
System Infrastructure Guide
Configuring Level 1 Components
93
Advertisement
Table of Contents
