Drive; Removing A Drive - Huawei TaiShan 2280 V2 User Manual

TaiShan 2280 V2 Server
User Guide
Step 4 Keep the key properly.
----End

5.3 Drive

l
l
l

5.3.1 Removing a Drive

Step 1 Wear an ESD wrist strap. For details, see
Step 2 If the server is equipped with a front bezel, remove the bezel before removing a front drive.
For details, see
Step 3 Press the ejector release button on the drive. See (1) in
The ejector lever automatically ejects.
Figure 5-5 Removing a drive
Issue 01 (2019-07-01)
For details about drive slot numbers, see
To ensure drive availability, the storage duration of a drive cannot exceed six months
before use.
If drives of different models are installed in one server and the customer has no special
requirements, observe the following rules:
– Use the Intelligent Computing Compatibility Checker
supported drives.
– A RAID array supports only drives of the same model. It is recommended that
drives in one server be of the same type and capacity, but SAS and SATA drives can
be installed in the same server.
– If drives of different capacities and the same type are to be installed in one server,
install small-capacity drives first and then large-capacity drives.
NOTE
l You do not need to power off the server when removing a drive.
l Before removing a drive, determine its location to prevent misoperations.
5.2.1 Removing the Front
Copyright © Huawei Technologies Co., Ltd.
2.9 Drive Slot Numbers and
12 Preventing Electrostatic
Bezel.
Figure 5-5.
5 Optional Part Installation
Indicators.
to query the types of
Discharge.
87