Connecting A Usb Device - Huawei TaiShan 200 23280 User Manual

TaiShan 200 Server (Model 2280)
User Guide
2.
Step 6 Check that the new cable is properly connected.
Power on the server, and ping the IP address of the peer device. If the peer device
cannot be pinged, check whether the cable is intact or the connectors are securely
connected.
Step 7 Bind the new optical cable.
Bind the new network cable in the same way as the existing network cables. You
can also remove all cable ties and bind all of the optical cables again if necessary.
----End

5.8.5 Connecting a USB Device

Step 1 Wear an ESD wrist strap. For details, see
Step 2 Connect a USB device to a USB port on the server. See
Issue 09 (2021-01-12)
Connect the new SFP+ cable.
Remove the dust-proof cap on the port, and insert the cable connector into
the port. See Figure
NO TE
When you hear a "click" sound and the cable cannot be pulled out, the connector is
securely connected.
Figure 5-14 Connecting an SFP+ cable
Copyright © Huawei Technologies Co., Ltd.
5-14.
5.3 ESD
5 Installation and Configuration
Protection.
Figure 5-15.
58